PRODUCT CENTER
Excavator sand pump
1. There is a stirring impeller at the bottom of the pump, which can prevent large pieces of solid substances from clogging the pump, so that the solid and the liquid are fully mixed, which is easier to handle.
Category:
Sand pump
Category:
Excavator sand pump
Details description

Excavator sand pump
1. There is a stirring impeller at the bottom of the pump, which can prevent large pieces of solid substances from clogging the pump, so that the solid and the liquid are fully mixed, which is easier to handle.
2. This pump can handle solid substances with a particle size of 50mm, and the concentration of solid-liquid extraction can reach more than 30%;
Note: Due to different working conditions, the output of the pump may also vary with the medium processed, on-site operation, conveying distance and other factors.
3. The device is mainly installed on the excavator, and the power is provided by the hydraulic station of the excavator, which can realize free transfer, and the power source is a diesel engine, which can solve the problem of inconvenience of electricity during construction in remote areas.
4. The overflow parts are all made of hard chromium alloy, which has a long service life.
Precautions for use:
1. Ensure that the hydraulic oil of the system is pure, less impurities, and has good lubricity, compatibility and stability;
2. According to the pressure, displacement, efficiency, etc. of the existing hydraulic system, reasonably equip the sediment pump so that the system can operate normally and must not exceed the system load for a long time;
3. When used with the excavator, the excavator arm should move lightly and slowly, and it is strictly forbidden to knock or smash hard under hard working conditions to avoid damaging the pump body;
4. Select standard hydraulic YouTube, use the specified bolts and lock them with torque. Unqualified installation will cause failure, damage or oil leakage;
5. When the equipment is transferred, the cleaning of the hydraulic oil port should be ensured to prevent impurities from entering, etc., which will affect the normal service life of the motor;
6. Without permission, it is forbidden to modify or disassemble the equipment without permission, otherwise it will lead to abnormal operation or abnormal operation.
